home designer architectural 2017 changing wall heights

HOME DESIGNER ARCHITECTURAL 2017 CHANGING WALL HEIGHTS FULL
HOME DESIGNER ARCHITECTURAL 2017 CHANGING WALL HEIGHTS SOFTWARE

The architect adds information about materials to be used.

The architect establishes the scale and dimensions of the ceiling.

The contractor establishes the ceiling type – traditional, suspended, and so on.

It is usually put together in the following way:

HOME DESIGNER ARCHITECTURAL 2017 CHANGING WALL HEIGHTS SOFTWARE

How do you make a reflected ceiling plan?Īn RCP can be produced by hand or by using architectural software such as AutoCAD and Revit. Each fixture will also have its own identifying letter, so that additional information can be given elsewhere without cluttering up the plan itself. Reflected ceiling plans use different symbols for different features, and these will be explained in a key which appears on the RCP itself. When the room below is shown, furniture and fixtures are shown with dotted lines to indicate that they are on a lower plane. Often, the best way to read an RCP is to imagine that you are levitating just above the ceiling, which is transparent, and there is a mirror about a meter below that reflects everything on the ceiling back at you.įor clarity, some RCP’s show only the details of the ceiling, and not the room below. How do you read a reflected ceiling plan? For larger spaces, a circuit-breaker layout.Circuiting and switching for each feature of the ceiling.Number, position and type of ceiling panels.

The kinds of details that are then added by an engineer are:

A key that explains the identifying letters assigned to each fixture, giving specifications for items such as lights, smoke detectors, sprinklers, speakers, cameras, monitors, grilles/diffusers for HVAC system.

A key that explains the symbols used on the plan (e.g.

Specifications for the ceiling finish, e.g.

Specifications on the type of ceiling, e.g.

Dimensions, including the height of the ceiling above the finished floor (often referred to as AFF).

You are likely to find the follow things included in an initial RCP produced by an architect or interior designer: What is included in a reflected ceiling plan? Reflected ceiling plans are initially produced by architects or interior designers, and then passed onto engineers for electrical details to be added. They are drawn to the same scale as the floor plan, commonly a quarter of an inch to one foot (the scale should appear at the bottom of the RCP drawing).

drywall patterns), light fixtures, and other items that are mounted on or suspended from the ceiling. RCP’s show things like electrical wiring, the ceiling treatment (e.g. It shows features of the ceiling as though they were being reflected onto a mirrored floor below – hence the name.

The floor height for the structure has not been adjusted.Learn More What is a reflected ceiling plan?Ī reflected ceiling plan (RCP) is a kind of architectural drawing.

The two lines on the right are at an Elevation of 0.'.

The single line that intersects the structure is at an Elevation of -36'.

In this example, the four Elevation Lines on the left side of the terrain have an Elevation value of -96'.

You may need to adjust either the floor height or some of the elevation data up or down a bit to get the first floor to rest just right on the terrain.

Build the first floor of your plan at the location of the slope in your terrain.Create a Terrain Perimeter and use the Elevation Data tools to create varying elevation as demonstrated in the section above.

HOME DESIGNER ARCHITECTURAL 2017 CHANGING WALL HEIGHTS FULL

To see the results of your elevation data, view your terrain by selecting 3D> Create Perspective View> Perspective Full Overview.

The program automatically generates contour lines between the Elevation Lines that you drew.

When your elevation data is in place, select Terrain> Build Terrain from the menu.

Home designer architectural 2017 changing wall heights